Testo data logger
Small, smart, reliable!
Testo data loggers record fluctuations in physical measurement parameters such as temperature, humidity and current/voltage over a defined period of time. This can take place either stationary on site or accompanying transport.Data loggers are thus the safest and easiest way to guarantee the long-term storage and documentation of measurement data.
Your contact info:* Mandatory fields
|
|
Contact Testo Inc. 40 White Lake Road Sparta, , NJ 07871 USA Telephone: 1-800-227-0729 Fax: 1-862-354-5020 E-Mail: info@testo.com www.testo.us |
|
Measurement of ambient conditions in buildings and storerooms
Testo is the specialist for humidity measurement. The Testo data loggers allow continuous monitoring of a buildings climate for documentation purposes. Using the data collector testo 580, a number of data loggers at different measurement sites can be quickly read out by infrared transfer and reprogrammed.
Temperature monitoring in refigerators and refrigerated rooms
Testo data loggers allow the continuous monitoring of the adherence to norms, and thus the requirements of proof for third parties. Testo products are thus an important component in the protection of sensitive goods.
Temperature monitoring during transport
The basic prerequisite for monitoring during transport is the versatility of the logger. Testo data loggers stand out here not only due to their robustness but also their flexibility. Due to easy configuration and fast readout, whether using the fast printer testo 575 or the data collector testo 580, the Testo data loggers are flexible and quickly ready for use.
Temperature and humidity monitoring in production processes
Production processes place the highest demands on the accuracy and reliability of the processes. Testo data loggers provide uninterrupted monitoring of the production parameters temperature and relative air humidity. They build the foundation for successful process management and constant quality assurance.
Monitoring ambient conditions in laboratories
Laboratories place the highest demands on all aspects of the measurement technology Highest accuracies and safe storage of measured values are crucial for a successful examination. The extensive range of external probes makes it possible to covermany measurement sites with one Testo data logger. Fast measurement cycles ensure that even short fluctuations are recorded.
Monitoring climate in cleanrooms
Cleanrooms demand the very highest accuracies from the measurement technology. Testo data loggers are ideally suited to this application thanks to their precise measurement technology, proven in an international inter-laboratory test.
Monitoring current/ voltage fluctuations for various production
Testo data loggers of the class 175 allow the storage and documentation of different measurement parameters thanks to the recording of analog output signals. This allows Testo data loggers to be used flexibly in industrial processes.
The data logger series testo 175 and testo 177
testo 175 consists of 7 small, compact data loggers fro the measurement of temperature, humidity and current/voltage. Tehe series testo 177 contains 5 instruments for various applications, which are ideal for long-term use. All loggers with a display provide a fast overview on site over the current measurement value, the last value stored, the max. and min. values and the number on limit value violations. The "data collector" which suits all data loggers testo 580 and the universal fast printer testo 575 open up new possibilities in the handling of measurement data. All loggers are validateable in combination with the ComSoft 21CFR Part 11. This guarantees security in pharmaceutical and chemical production processes.
testo 581 - the alarm switch output
The alarm switch output testo 581, which can be plugged onto the data logger, allows the forwarding of alarm reports to external components such as: horns, lamps and PLCs. AN alarm is triggered when limit values programmed into the logger are violated, if the logger is stopped, if the battery is empty, there is no probe connected, or if the alarm switch output battery is empty.
testo 580 - the data collector on site
The "data collector" testo 580 allows fast and easy readout, (without interruption of the measurement series), stopping and reprogramming of several data loggers on site. Approx. 400 measurement values per second are tranferred from the logger to the data collector via infrared interface. A logger, whether testo 175 or testo 177, can thus be read out in a few seconds. All values recorded with the "data collector" can then be completely carried over into a PC and analyzed using the ComSoft software.
testo 575 - the fast printer on site
The fast printer testo 575 ensures high-quality printouts of easurement values as a table or a graph. The measurement series does not need to be interrupted. Data transfer takes place on site without contact by infrared. This allows fast and easy documentation even without a PC. The testo 575 can also be used to stop and reprogram the data loggers. Reprogamming the logger via a PC is of course also possible.
Non-volatile memory for secure data.
The data logger series testo 175 and testo 177 give you the assurance that measurement data are not lost, even when the battery is spent or when replacing the battery, which can be easily carried out by the customer himself. Dependent on the progamming data, the ComSoft software also calculates the projected battery life. This creates the prerequisite for uninterrupted documentation – even over years. Another crucial factor for reliable and controlled measurement.
High durability
The ABS housing with its non-slip soft cover is robust and guarantees protection form humidity and mechanical strain. Some loggers even have protection class IP 68.
ISO and DKD calibration services
In many industrial companies, the use of a measuring instrument is only conceivable with suitable calibration. Testo offers the possibility of calibrating any transmitter with maximum precision. With a unique combination of DKD calibration laboratories accredited to ISO17025, for temperature, relative humidity, flow velocity and pressure, Testo commands a unique position worldwide. ISO calibrations, which offer a cost-effective alternative to DKD calibration, are accepted during many audits as per ISO 9001, HACCP, GMP, FDA, VDA 6.1, ISO TS 16949 etc.
Windows® compatible software
The ComSoft 4.0 - Basic software offers all that is needed for the safe and fast storage of logger data. With the software, the starting conditions can be programmed as the touch of a button, by date and time or via a PC. The logger can be stopped after a defined number of measurements, by date and time, when the memory is full, manually via a PC, or via the printer testo 575 or the data logger testo 580. The wraparound memory allows "non-stop measurements", i.e. the oldest value is overwritten.The ComSoft 3.4 – Professional software additionally offers analysis options such as graphic mean value calculation, curve examination, other forms of presentation or the offset of measurement values. It is particularly suited to analysis tasks in industry, research and development.
ComSoft 4 - Basic software
The ComSoft 4 - Basic software offers all that is needed for the safe and fast storage of logger data. With the software, the starting conditions can be programmed as the touch of a button, by date and time or via a PC. The logger can be stopped after a defined number of measurements, by date and time, when the memory is full, manually via a PC, or via the printer testo 575 or the data logger testo 580. The wraparound memory allows "non-stop measurements", i.e. the oldest value is overwritten.
ComSoft 3.4 - Professional software
The ComSoft 3.4 – Professional software additionally offers analysis options such as graphic
mean value calculation, curve examination, other forms of presentation or the offset of measurement
values. The Professional version offers, in addition to many other functions, the possibility of
archiving measurement values conveniently, thus storing them securely in the long-term.
It is particularly suited to analysis tasks in industry, research and development.
ComSoft 21CFR Part 11
If you are subject to the regulations of the FDA in your daily work, or are in the paharmaceutical field, you need the 21 CFR Part 11 compliant ComSoft Testo has had the ComSoft 3.4 certified according to the requirements of 21CFR Part 11 in combination with the Testo data loggers, and is thus optimally adapted to the demands of the pharmaceutical industry.
