Data monitoring was never before as flexible and safe as it is today. Because now, you monitor and document all the humidity and temperature values of your products without interruption, during transport as well as stationary, with the monitoring system testo Saveris.
This means you now have the right solution for every application:
testo Saveris monitors measurement values without interruption – from a medicine to a blood product.
Medicines are subject to influences from ambient values, from production to transport. testo Saveris monitors and documents all these humidity and temperature values without interruption.
In the pharmaceutical industry, high demands are placed on the recording and monitoring of
quality parameters. Constant documentation during the production, storage and transportation of
temperature-sensitive products such as medicines, blood products or cell cultures has long been
considered an absolute "must". testo Saveris automates the central documentation of measurement
data as well as the safe monitoring of refrigerated and deep-freeze rooms, incubators and climate
cabinets. At the same time, the system allows the uninterrupted recording of measurement data, even
during the transport of temperature or humidity-critical products such as medicaments or vaccines.
This means testo Saveris offers the optimum control of production and storage, via transport,
up to delivery. The comprehensive alarm management allows fast alarming if limit values are
violated. Thanks to a combination of wireless and/or Ethernet probes, the system is optimum for
many different applications in the pharmaceutical industry. It goes without saying that the data
monitoring system testo Saveris meets the requirements of 21 CFR Part 11.
testo Saveris provides even more security when monitoring data.
Delicate research objects, sensitive measurements or meal distribution in hospitals: testo Saveris documents and monitors all data without interruption.
Research and development areas as well as laboratories and hospitals are responsible for the
recording of ambient and process data in order to monitor sensitive products or machines. However,
the monitoring of temperature and humidity-critical goods during transport is also crucial for a
high standard of quality. testo Saveris carries out the central documentation of the measurement
series, for stationary as well as for transport applications.
testo Saveris thus guarantees the simple and secure monitoring of climate and process data in
air conditioning chambers, refrigerators, drying chambers, test benches or blood banks. If critical
values are to be monitored during transport, testo Saveris offers the optimum solution.
With testo Saveris, you have the freshness of foodstuffs under control – from production to the shelf.
Only the strict monitoring of the temperature cold chain guarantees the high quality of foodstuffs. This means: All limit values must be monitored and documented everywhere and at all times.
Compliance with predefined temperature values is a decisive factor for quality in food
production and is important for complying with legal hygiene standards. However, the decisive
factor is the uninterrupted monitoring of the cold chain during production, storage, and above all,
during transport. Only this uninterrupted monitoring provides a final guarantee that the quality
and freshness of the products can be evaluated.
testo Saveris automates not only the monitoring of the ambient and production temperatures
during production and storage, but also of defined temperature limit values during transport. The
installation of wireless probes in delivery vehicles makes the complicated wiring of the driver’s
cabin unnecessary.
Alarms are issued whenever the limit values are exceeded. The measurement data from
stationary and transport applications are saved centrally in a database and are accessible at any
time. All measurement values are under control! testo Saveris conforms to the EN 12830
standard.
testo Saveris – the perfect monitoring system for industry.
In industry, a number of quality data must be recorded and monitored, from product manufacture to transport. testo Saveris is excellently suited to this purpose.
The data monitoring system testo Saveris automates the documentation of the data and alarms when limit values are exceeded. Products and processes are thus guaranteed at a high level of quality. testo Saveris is ideal for use in the monitoring and documentation of ambient and temperature data in production areas, storerooms, refrigerators and climate cabinets. At the same time, testo Saveris allows the uninterrupted recording of measurement parameters during the transport of sensitive products. The most varied applications, stationary as well as in transport, are optimally covered by testo Saveris radio probes and/or Ethernet probes.
Easy, flexible monitoring with testo Saveris.
Unfavourable temperature and humidity values have a negative effect on sensitive inventory. testo Saveris guarantees the documentation and monitoring of all ambient values for the uniformly high quality of the products.
When monitoring the building climate, stable ambient conditions are especially necessary in
museums and archives in order to protect sensitive and expensive objects. And during transportation
also, valuable goods must be constantly monitored. testo Saveris automates the central recording of
all climate data, stationary as well as during transport.
By issuing alarms when limit values are exceeded, testo Saveris protects valuable inventory
from undesired temperature or humidity influences at all times. The radio probe can be flexibly
attached to locations without the effort of routing cables.
|
|
|
The data monitoring system testo Saveris measures the temperature and humidity values of
sensitive goods and products in the environment, in processes and during transport. The easy-to-use
measurement system delivers safety and savings in time and costs thanks to automated measurement
data recording.
In stationary operation, the transfer of the measurement data takes place via wireless and/or
Ethernet connection to a base station. This documents and monitors all measurement data. If limit
values are exceeded, a whole range of different alarm options, such as SMS/e-mail alarm or alarm
relay is available. Remote alarms can even be given when the system is not connected to a running
PC. testo Saveris works in many countries with a radio frequency of 868 MHz.
If measurement parameters are documented during transport, the driver receives all necessary
information and alarms from a Cockpit Unit in the driver’s cabin Documentation and monitoring takes
place via wireless probes, the time-consuming installation of wired sensors in the truck is
unnecessary. At the same time, the possibility of printing out measurement values at the handover
of goods also exists. All data recorded, whether stationary or on the road, are centrally stored in
a software. At the same time, Saveris allows the comprehensive analysis and evaluation of all
recorded measurement data. With testo Saveris, all measurement data are under control, whether
stationary or on the road.
Here is a list of all wireless
permissions.
testo Saveris can be assembled completely according to your requirements.
One of our contact partners will be happy to help with your questions.
|
testo Saveris radio probeProbe versions with internal and external temperature sensors and with humidity sensors allow the adaptation to every application. The radio probes are available with or without a display as an option. Current measurement data, the battery status and the quality of the radio link are shown on the display. |
|
testo Saveris RouterThe radio link can be improved or lengthened in poor structural conditions by using a router. Several routers can of course be used in the testo Saveris system. At the same time, the serial switching of up to three routers V 2.0 offers highest flexibility in the wireless range. |
|
testo Saveris analoge couplerThe two versions of the analog coupler (wireless / Ethernet) allow the inclusion of other measurement parameters into the testo Saveris monitoring system, by integrating all measurement transmitters with standardized current/voltage interfaces, e. g. 4 to .20 mA or 0 to .10 V. |
|
testo Saveris ConverterThrough the connection of a converter to an Ethernet jack, the signal of a radio probe can be converted into an Ethernet signal. This combines the flexible connection of the radio probe with the use of the existing Ethernet even over long transmission paths. |
|
testo Saveris analoge couplerThe two versions of the analog coupler (wireless / Ethernet) allow the inclusion of other measurement parameters into the testo Saveris monitoring system, by integrating all measurement transmitters with standardized current/voltage interfaces, e. g. 4 to .20 mA or 0 to .10 V. |
|
Humidity transmitters testo 6651/6681/6351/6381Thanks to the integration of the humidity transmitter, measurement data monitoring is possible parallel to the control. This provides the solution for highest accuracy as well as for special applications (high humidity, trace humidity etc.) in compressed air, drying and air conditioning technology. |
|
testo Saveris BaseThe base is the heart of testo Saveris and can save 40,000 readings per measurement channel independently of the PC. The system data and alarms are visible via the display of the Saveris base. |
|
testo Saveris SoftwareThe testo Saveris software offers simple operation and an intuitive user interface. The Saveris software is available in three different versions: as the basic version SBE (Small Business Edition), the PROF (Professional) software version with diverse additional options, or as the CFR version. The CFR software fulfils the requirements of the FDA's 21 CFR Part 11 and is thus validatable. |
|
testo Saveris Ethernet probeIn addition to the radio probes, probes can be used that are directly connected to the Ethernet. The existing LAN infrastructure can be used through this. This allows the data transfer from the probe to the base, even over long distances. |
|
testo Saveris ExtenderBy connecting a Saveris Extender, the wireless signal of a transport probe is converted into an Ethernet signal. The data transfer from wireless probe to Extender takes place when sufficient wireless connection is present. |
|
testo Saveris Cockpit UnitThe Saveris Cockpit Unit displays all measurement values to the driver without interruption during transport. If limit values are violated, the driver is immediately warned. Alternatively, the complete data recording can be printed out at the handover site of the goods using an infrared printer on the Cockpit Unit. |
|
Example of configurationWhether in industry, in food production or in museums: testo Saveris is the ideal data monitoring system for every application. |
Wireless permit (868 MHz)
Functionality without borders – with testo Saveris, you have everything under control in the following countries.
|
|
|
|
testo AG
Testo-Straße 1
79853 Lenzkirch
Germany
Telephone: 07653 681-700
Fax: 07653 681-701
E-Mail:
vertrieb@testo.de
The base is the heart of testo Saveris and can save 40,000 readings per measurement channel independently of the PC. The system data and alarms are visible via the display of the Saveris base.
| Features: |
|
|
|
Learn more about the technical specifications of the testo Saveris TM Base |
|
| Memory | 40,000 values per channel (total max. 18.000.000 values) |
| Dimensions | 225 x 150 x 49 mm |
| Weight | approx. 1510 g |
| Protection class | IP42 |
| Housing material | Die-cast zinc/plastic |
| Radio frequency | 868 MHz / 2,4 GHz |
| Power supply (absolutely necessary) | 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, power consumption Æ4 W |
| Rech. batt. | Li-ion battery (for data back-up and for emergency SMS with failure of the power supply) |
| Oper. temp. | -10 ... +50 °C |
| Storage temp. | -40 ... +60 °C |
| Display | graphical display, 4 control keys |
| Interfaces | USB, radio, Ethernet |
| Connectable radio probe | max. 15 probes can be directly connected via radio interface, max. 150 total via radio / Router / Converter / Ethernet / Extender max. 450 channels |
| Alarm relay | max. 1 A, max. 30 W, max. 60/25 V DC/AC, NC or NO contact |
| GSM module | 850 / 900 / 1800 / 1900 MHz not valid for Japan and South Korea |
| Set up | Table base and wall bracket included |
The Saveris Cockpit Unit displays all measurement values to the driver uninterruptedly during transport. If limit values are violated, the driver is immediately warned. Alternatively, the complete data recording can be printed out at the handover site of the goods using an infrared printer on the Cockpit Unit.
| Features: |
|
|
|
|
|
| Memory | max. 20.000 readings |
| Dimensions | ca 150x 90x 40 mm |
| Weight | approx. 210g |
| Protection class | IP30 |
| Housing material | Plastic |
| Radio frequency | 868 MHz |
|
Power supply (absolutely necessary)
|
Mini USB cable incl. adapter 12/24 V DC |
| Oper. temp. | -30 ... +65 °C |
| Storage temp. | -40 ... +65 °C |
| Display | graphical display, 4 control keys |
| Interfaces | Wireless, USB, infrared |
|
Connectable radio probe
|
up to 2 zones of 4 wireless probes each. max. 32 channels |
| Attachment | Sucker pad with telescope function |
The individually combinable data monitoring system offers practical solutions, even under difficult structural conditions. Several Routers can be switched in series, the Converters and Extenders ensure highest flexibility in signal transmission, even over longer distances.
Probe versions with internal and external temperature sensors and with humidity sensors allow the adaptation to every application. The radio probes are available with or without a display as an option.
The existing LAN infrastructure can be used through the Ethernet probe. This allows the data transfer from the probe to the base, even over long distances. Ethernet probes have a display.
Testo offers you three different software packages, depending on your requirements, so that you have everything under control from your PC. The uncomplicated installation and operation guarantee you easy uninterrupted documentation and monitoring of your measurement values.
The PROF (Professional) software version offers interesting additional functions beyond the attractive standard functions of the basic version SBE, e.g.:
|
Validatable CFR-Software fulfils the requirements of the FDA's 21 CFR Part 11.
| Overview of software features | SBE | PROF | CFR |
| Calendar management |
|
|
|
| Presentation of probe groups |
|
|
|
| Alarm dispatch (e-mail, SMS, relay) |
|
|
|
| Comprehensive alarm management in stationary operation |
|
|
|
| Automated update of measurement data quot;Online-Mode") in stationary operation |
|
|
|
| Measurement data on background photo of measurement sites |
|
|
|
| Integration in network (client-server) |
|
|
|
| Tour planning with calendar management |
|
|
|
| Allocation of access rights for stationary and mobile probe groups |
|
|
|
| Search function for tours |
|
|
|
| Configuration of print text |
|
|
|
| Diagrams / tables with identification of start and stop of tour |
|
|
|
| 21 CFR Part 11 compliant (validatable) |
|
||
| Electronic signature |
|
||
| Audit Trail |
|
||
| Allocation of access rights on 3 user levels |
|
| Overview of application areas Saveris software | SBE | PROF | CFR |
| Stationary operation |
|
|
|
| Mobile operation |
|
|
|
| Stationary- and Mobile operation |
|
|
Want to find out more about testo Saveris?
Please select the respective info material (PDF):
 |
 |
 |
|
|
Product
brochure |
Flyer Food
Logisitcs |
Flyer
Pharmaceutical Logistics |
Flyer
Industry |
Flyer
Hospitals |
You can also order the product brochure as a print version under Contact.
