testo 340 for emission measurement in industry!

Benefit from the advantages offered by the new testo 340 for flue gas analysis in industrial applications:

 

> Different - measuring ranges to support your flue gas analyzes
> Automatic measuring range extension
> Flue gas sampling probe for every measurement task

 

Best support in flue gas analysis

  • You are flexible, and decide which parameters to measure depending on the measurement requirements of the system.
  • The testo 340 is equipped with an O2-Sensor as standard.
  • Three slots are available to you for different gas measurement parameters. This means you can select freely from CO, COlow, NOlow, NO2 or SO2. You need no additional sensors for different - measuring ranges – that lowers costs!

Automatic measuring range extension

The measuring ranges of your CO-, COlow-, NO-, NO2- or SO2-sensor is increased 5 times by automatic measuring range extension. At high gas concentrations the sensor is then not stressed any more than it would be at low concentrations. As an option, the measuring ranges of all the sensors in the analyzer can be extended simultaneously by a factor of 2.


 

You save time, as the automatic sensor protection allows you to carry out unrestricted measurements. In order to protect the sensor, the measuring range extension (dilution) is automatically activated at unexpectedly high gas concentrations.

Gas sensor Measuring range Measuring range extension
Single dilution
CO-sensor 0... 10.000 ppm to 50.000 ppm
COlow-sensor 0...      500 ppm to  2.500 ppm
NO-sensor 0...   3.000 ppm to 15.000 ppm
NOlow-sensor 0...      300 ppm to   1.500 ppm
NO2-sensor 0...      500 ppm  
SO2-sensor 0...   5.000 ppm to 25.000 ppm

No additional sensors and costs with different measuring ranges.

The right flue gas sampling probe for every measurement task

Bigger selection...

 

Different probe shaft lengths, diameters and temperature ranges ensure high flexibility for all applications. To change, the probe
shaft is simply attached to the probe handle and snaps into place. Special flue gas probes for industrial engines are designed for positive pressure at the measurement site and also makes measurements in the toughest conditions possible. In addition, modular industrial probes are available for rugged process conditions.

 

Product brochure
Technical data
Data communication
Testo Call back
Contact
testo, Inc.
40 White Lake Rd.
Sparta, NJ 07871



Telephone: 800-227-0729
Fax: 862-354-5020

E-Mail: info@testo.com
http://www.testo.com

testo 340 – The ideal tool for service, maintenance and inspections - convenient and credible!

> Your low-budget entry into industrial emission measurement
> Service and maintenance work on burners and industrial combustions systems
> Ensure optimum adjustment of stationary engines
> Application-specific sensor selection for your measurements on turbines

Your low-budget entry into industrial emission measuremen

 

testo 340's high measurement accuracy and easy handling enable efficient and reliable "emission checks" for fast assessment of industrial combustion systems:

Your benefits from the testo 340:

 

• Spot measurements for up to two hours

testo 340 can independently run 5 user-defined measurement programs. Spot measurements of up to max. two hours are therefore possible. Measurement is also possible "online' using Bluetooth or a USB cable.

 

• Simultaneous differential pressure measurement

Simultaneous measurement of flue gas and flow velocity allows calculation of current mass flow.

 

• At different measurement points in your system

Battery operation possible thanks to battery life of more than six hours.

 

• Highest flexibility in the selection of sensors

Equipped with an O2 sensor as standard, 3 additional gas
parameters can be freely selected from the following 6: CO, COlow, NO, NOlow, NO2 and SO2.

 

For service and maintenance on industrial burners and furnaces

 

testo 340 offers many technical functions for safe and efficient commissioning, tuning, efficiency optimizationn and troubleshooting when servicing industrial burners:

Your benefits from the testo 340:

 

• Direct display of air ratio and efficiency

All relevant combustion and calculation parameters for optimum tuning are clearly shown in the display.
 

• Measuring range extension and sensor protection

When commissioning burners or carrying out measurements on unfamiliar systems, very high concentrations can occur unexpectedly. In cases like these, the measuring range extension is automatically activated. This protects the sensor, as the load placed on it is no higher than at low concentrations.

 

• Always ready for use – even in rough daily work

The robust housing protects the analyzer from impact.

 

Ensure optimum adjustment of stationary engines

 

Versatile combination options of the different gas sensors in testo 340 offer you the highest level of flexibility in measurements on stationary engines:

Your benefits from the testo 340:

 

• Separate NO- and NO2 measurement

The real NOX value is measured with the sensor combination of NO and NO2. In gas engines, the NO2 component of the NOX value can fluctuate greatly, so separate measurement of both gases is necessary for correct NOX values.

 

• Measurements even at high CO concentrations

Even at unexpectedly high concentrations (up to 50,000 ppm), automatic dilution of the sensor with fresh air allows measurements even when the engine status is undefined, without negatively influencing the life expectancy of the sensor.

 

• Special flue gas probes for industrial engines

These probes are highly heat-resistant and are specially designed to compensate different pressure conditions, for example in measurements before and after the catalytic converter.

 

• Engine-specific parameters

The most important parameters for industrial engines such as O2, CO, NO, NO2, NOX and Lambda can be displayed simultaneously.

 

Application-specific sensor selection for measurements on turbines

 

To reduce emissions from gas turbines, CO and NO measurements using testo 340 in low ranges are necessary. The COlow and NOlow sensors in testo 340 are ideally suited to this task:

Your benefits from the testo 340:

 

• Special NOlow sensor for low concentrations

The NOlow sensor for measurements on LowNOX turbines can be freely combined with other sensors.

 

• Measuring range extension and COlow sensor

Thanks to the measuring range extension, the COlow sensor can measure up to 2,500 ppm without any problems.

 

• Easy and accurate test gas adjustment

If required, testo 340 can be easily adjusted with test gas on site.

 

Product brochure
Technical data
Data communication
Testo Call back
Contact
testo, Inc.
40 White Lake Rd.
Sparta, NJ 07871



Telephone: 800-227-0729
Fax: 862-354-5020

E-Mail: info@testo.com
http://www.testo.com

testo 340: more reliability, more convenience and even more parameters

Benefit from the advantages offered by the new testo 340 for flue gas analysis in industrial applications

  

> Your low-budget entry into industrial emission measurement
> Service and maintenance work on burners and industrial combustions systems
> Ensure optimum adjustment of stationary engines
> Application-specific sensor selection for your measurements on turbines

 

Your low-budget entry into industrial emission measurement

 

  • Spot measurements for up to two hours
  • Simultaneous differential pressure measurement
  • At different measurement points in your system
  • Highest flexibility in the selection of sensors

Ideal order suggestion for this application

  Part no.  
testo 340 flue gas analyzer incl. rechargeable battery, calibration protocol and carry
strap, equipped with O2 sensor and built-in flow/differential pressure measuremen		 0632 3340  
Option: CO (H2 compensated) measurement module, 0 to 10,000 ppm 0393 1100  
Flue gas probe, modular, 335 mm immersion depth, incl. probe stop, thermocouple
NiCr-Ni (TI) Tmax 500°C and hose 2.2 m		 0600 9766  
100-240 V AC / 6.3 V DC international mains unit 0554 1096

  
Option: BLUETOOTH® module 0344 0013   
BLUETOOTH® printer set with wireless Bluetooth interface, incl. 1 roll thermal paper,
rechargeable battery and mains unit		 0554 0553  
Transport case for analyzer and probes 0516 3400  
 

 

For service and maintenance on burners and industrial combustions systems

 

  • Direct display of air ratio and efficiency
  • Measuring range extension and automatic sensor protection
  • Always ready for use – even in rough daily work


Ideal order suggestion for this application

  Part no.
testo 340 flue gas analyzer incl. rechargeable battery, calibration protocol and carry
strap, equipped with O2 sensor and built-in flow/differential pressure measurement		 0632 3340  
Option: CO (H2 compensated) measurement module, 0 to 10,000 ppm 0393 1100  
Option: NO measurement module, 0 to 3,000 ppm* 0393 1150  
Option: SO2 measurement module, 0 to 5,000 ppm 0393 1250  
Flue gas probe, modular, 335 mm immersion depth, incl. probe stop, thermocouple
NiCr-Ni (TI) Tmax 1000°C and hose 2.2 m		 0600 8764  
"easyEmission" software with USB cable to connect instrument to PC 0554 3334  
Transport case for analyzer and probes 0516 3400  

*We recommend the NOlow sensor (0393 1152) to measure low NO values.

 

Ensure optimum adjustment of stationary engines

 

  • Separate NO and NO2 measurement
  • Separate NO and NO2 measurement
  • Special flue gas probes for industrial engines as accessories
  • Engine-specific parameters

Ideal order suggestion for this application

  Part no.
testo 340 flue gas analyzer incl. rechargeable battery, calibration protocol and carry
strap, equipped with O2 sensor and built-in flow/differential pressure measurement		 0632 3340  
Option: CO (H2 compensated) measurement module, 0 to 10,000 ppm 0393 1100  
Option: NO measurement module, 0 to 3,000 ppm 0393 1150  
Option: NO2 measurement module, 0 to 500 ppm 0393 1200  
Flue gas probe for industrial motors, 335 mm immersion depth, with probe stop, builtin
condensate trap and heat protection plate, Tmax 1000 °C, special hose for NO2/SO2
measurements, 2.2 m long*		 0600 7560  
Option: dilution of all sensors 0440 3350  
100-240 V AC / 6.3 V DC international mains unit 0554 1096   
"easyEmission" software with USB cable to connect instrument to PC 0554 3334  
Transport case for analyzer and probes 0516 3400  
         

 *We recommend the flue gas probe with probe pre-filter (0600 7561) for measurements on stationary diesel engines.

 

Application-specific sensor selection for measurements on turbines

 

  • Special NOlow sensor for low concentrations
  • Measuring range extension and COlow sensor
  • Easy and accurate test gas adjustment by the user

 

Ideal order suggestion for this application

  Part no.
testo 340 flue gas analyzer incl. rechargeable battery, calibration protocol and carry
strap, equipped with O2 sensor and built-in flow/differential pressure measurement		 0632 3340  
Option: CO (H2 compensated) measurement module, 0 to 10,000 ppm* 0393 1100  
Option: NOlow measurement module, 0 to 300 ppm 0393 1152  
Option: NO2 measurement module, 0 to 500 ppm 0393 1200  
Flue gas probe for industrial motors, 335 mm immersion depth, with probe stop, builtin
condensate trap and heat protection plate, Tmax 1000 °C, special hose for NO2/SO2
measurements, 2.2 m long		 0600 7560  
100-240 V AC / 6.3 V DC international mains unit 0554 1096  
"easyEmission" software with USB cable to connect instrument to PC 0554 3334  
Transport case for analyzer and probes 0516 3400  

*We recommend the COlow sensor (0393 1102) for measuring low CO values.

 

Product brochure
Technical data
Data communication
Testo Call back
Contact
testo, Inc.
40 White Lake Rd.
Sparta, NJ 07871



Telephone: 800-227-0729
Fax: 862-354-5020

E-Mail: info@testo.com
http://www.testo.com

Technical Data testo 340

  Measuring range Accuracy Resolution Response
time
O2 measurement
 0 to 25 Vol. % ±0.2 Vol. % 0.01 Vol.% t90< 20 sec
CO measurement
(H2 compensated)		 0 to 10.000
ppm

±10 ppm or ±10% of mv
(0 to 200 ppm)
±20 ppm or ±5% of mv
(201 to 2.000 ppm)
±10% of mv (2.001 to 10.000 ppm)

 1 ppm t90< 40 sec
COlow measurement
(H2 compensated)		 0 to 500 ppm

±2 ppm (0 to 39.9 ppm)
±5% of mv (remaining range)X

x data corresponds to 20°C ambient temperature.
Additional temperature coefficient 0.25% of reading/K.

 0.1 ppm t90< 40 sec
NO-measurement 0 to 3.000 ppm ±5 ppm (0 to 99 ppm)
±5% of mv (100 to 1.999 ppm)
±10% of mv (2.000 to 3.000 ppm)		 1 ppm t90< 30 sec
NOlow measurement 0 to 300 ppm ±2 ppm (0 to 39.9 ppm) ±5% of mv
(remaining range)		 0.1 ppm t90< 30 sec
NO2 measurement* 0 to 500 ppm ±10 ppm (0 to 199 ppm)
±5% of mv (remaining range)		 0.1 ppm t90< 40 sec
SO2 measurement* 0 to 5.000 ppm ±10 ppm (0 to 99 ppm)
±10% of mv (remaining range)		 1 ppm t90< 40 sec

Temperature measurement
Fühlertyp Typ K
(NiCr-Ni)

 -40 to +1.200°C ±0.5 °C (0 to +99 °C)
±0.5 % of mv (remaining range)		 0.1 °C
Draught measurement -40 to+40 hPa ±0.03 hPa (-2.99 to +2.99 hPa)
±1.5 % of mv (remaining range)		 0.01 hPa  
Differential pressure
measurement		 -200 to +200 hPa ±0.5 hPa (-49.9 to 49.9 hPa)
±1.5 % of mv (remaining range)		 0.1 hPa
Absolute pressure
measurement		 600 to +1.150
hPa		 ±10 hPa 1 hPa

Derived parameters

Efficiency

Flue gas loss

Flue gas dewpoint

 

0 to 120 %

0 to 99.9 %

0 to 99.9 °C

 

 

 

0.1 %

0.1 %

0.1 °C

CO2 measurement
(calculation from O2)

 

0 to CO2 max.

 

±0.2 Vol. %

 

0.1 Vol. %

Response time
t90 = ⟨ 40 s

*To avoid absorption, a maximum measurement duration of 2 hours should not be exceeded.

Measuring range extension

Single dilution, factor 5 (standard)
CO measurement
(H2 compensated)

Meas. range
Accuracy
Resolution

700 ppm to 50.000 ppm
±10 % of mv (additional error)
1 ppm
COlow measurement
(H2 compensated))		 Meas. range
Accuracy
Resolution		 300 ppm to 2.500 ppm
±10 % of mv (additional error)
0.1 ppm
NO-measurement Meas. range
Accuracy
Resolution		 500 ppm to 15.000 ppm
±10 % of mv (additional error)
1 ppm
NOlow measurement Meas. range
Accuracy
Resolution		 150 ppm to 1.500 ppm
±10 % of mv (additional error)
0,1 ppm
SO2 measurement Meas. range
Accuracy
Resolution		 500 ppm to 25.000 ppm
±10 % of mv (additional error)
1 ppm

Dilution of all sensors, factor 2 (option, Part no. 0440 3350)

O2 measurement
With measuring range extension switched
on over all sensors:

 Meas. range
Accuracy

Resolution		 0 to 25 vol.%
Accuracy: ±1 vol.% additional error (0 to 4.99 vol.%)
±0.5 vol.% additional error (5 to 25 vol.%)
Resolution: 0.01 vol.%
CO-Messung
(H2-kompensiert)		 Meas. range
Accuracy
Resolution		 700 ppm to 20.000 ppm
±10 % of mv (additional error)
1 ppm
CO measurement
(H2 compensated)		 Meas. range
Accuracy
Resolution		 300 ppm to 1.000 ppm
±10 % of mv (additional error)
0.1 ppm

NO-measurement

 Meas. range
Accuracy
Resolution		 500 ppm to 6.000 ppm
±10 % of mv (additional error)
1 ppm

NOlow measurement

 Meas. range
Accuracy
Resolution		 150 ppm to 600 ppm
±10 % of mv (additional error)
0.1 ppm

NO2 measurement

 Meas. range
Accuracy
Resolution		 200 ppm to 1.000 ppm
±10 % of mv (additional error)
0.1 ppm

SO2 measurement

Meas. range
Accuracy
Resolution

 500 ppm to 10.000 ppm
±10 % of mv (additional error)
1 ppm

 

General technical data

Memory Maximum
Per folder
Per site
The max. number of logs is determined by the number of folders or sites.		 100 folders
Max. 10 sites
Per site Max. 200 logs
Regulated diaphragm pump Pump flow
Hose length

Max. pos. pressure/ flue gas
Max. neg. pressure/ flue gas		 0.6 l/min (regulated)
max. 7.8 m
(corresponds to two probe hose extensions)
+50 mbar
-200 mbar
User-defined
fuels
10 user-defined fuels incl. test gas as fuel
Weight 960 g
Dimensions 283 x 103 x 65 mm
Storage temp. -20 to +50 °C
Oper. temp. -5 to+50 °C
Display Graphic display 160 x 240 pixels
Power supply Battery block 3.7 V / 2.4 Ah
Mains unit 6.3 V / 2 A
Material/Housing TPE PC
Protection class IP40
Warranty Analyzer:


Rech. batt.:
Sensors:
CO, NO, COlow, NOlow, NO2, SO2
O2		 2 years (excluding working parts, e.g. sensors, sensor replacement filter)

1 year

1 year
1,5 years

 

< Back

Product brochure
Data communication
Testo Call back
Contact
testo, Inc.
40 White Lake Rd.
Sparta, NJ 07871



Telephone: 800-227-0729
Fax: 862-354-5020

E-Mail: info@testo.com
http://www.testo.com

testo 340: Even more than easy of use - without ifs and buts

I am interested in the new flue gas analyzer testo 340 and I want to know more about its advantages. Please send me  detailed inforamtion. 

The following data are missing

    Your Data:

     
     
     
     
    /
    /
     
    /
    /
     
     
     
     
     
    I have questions about the new testo 340. Please call me back.
     
    testo 340: The new 4-sensor flue gas analyzer for emission measurement in industry
     
    Testo product portfolio: Measurement Solutions for Emissions, Service and Thermal Processes
     
     
    Please supply me with a quotation
     
    		 Yes, I agree to receive the free newsletter. Newsletters will be sent to the e-mail address provided with the latest news and offers from testo. I understand that I can stop the newsletters at any time using the unsubscribe link located at the bottom of e-mail correspondence.
     
     
    * Mandatory fields
    Testo Call back
    Contact
    testo, Inc.
    40 White Lake Rd.
    Sparta, NJ 07871



    Telephone: 800-227-0729
    Fax: 862-354-5020

    E-Mail: info@testo.com
    http://www.testo.com

    Call back

    Do you need personal consultation or assistance? Use our call-back service.


    We offer this service Monday to Friday from 7.30 a.m. to 5.30 p.m.
    The fields marked with ** are mandatory

     

    The following data are missing

      Your data:

       
       
       
       
       
      * Mandatory fields

      < Back

      Product brochure
      Technical data
      Data communication

      Data communication – That's how easy it is!

      Wireless reading out, transmission and printing of readings

       

      The new communication interface: Bluetooth® 2.0

      Wireless connection via Bluetooth® 2.0 to testo BLUETOOTH® printers and direct communication to Notebook/PC over a distance of up to 10m (free field) are features of the new testo 340 option. Readings and configurations are transmitted wirelessly to your Notebook/PC for storage and analysis.

       

       

      Testo printers

      Print data is transmitted wirelessly to the printer by infrared interface (visual contact required) or by new BLUETOOTH® wireless
      transmission. This saves time since the analyzser is ready for use again immediately following data transmission.

      Country permits BLUETOOTH® wireless transmission for testo 340
      The BLUETOOTH® radio module used by Testo is permitted for the following countries and may only be used in those countries, i.e. the BLUETOOTH® wireless transmission may not be used in any other country!

       

      Europe including all EU member states
      Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and Turkey.

       

      European countires (EFTA)
      Iceland, Liechtenstein, Norway, Switzerland

       

      Non-European countries
      Canada, USA , Japan, Ukraine, Australia, Colombia and El Salvador

      Convenient measurement data management with "easyEmission"

       

      Data can be read out, easily edited, filed and managed using "easyEmission" software:

       

      Benefits of easyEmission:

      • Readings are shown in table or graph form
      • User-defined measurement spacing (from one measurement / second to one measurement / hour)
      • Online measurements via BLUETOOTH® wireless transmission or USB connection
      • Customer and application-specific measurement logs
      • Data structure and measurement information can be transmitted from computer to analyzer
      • All instrument configurations and settings can be easily carried out with easyEmission
      • Direct transmission to Excel and pdf formats
      • asy implementation of individual formulae for your own calculations
      • Calculation of fuel factors when using customer-specific fuels

      < Back

      Product brochure
      Technical data
      Testo Call back
      Contact
      testo, Inc.
      40 White Lake Rd.
      Sparta, NJ 07871



      Telephone: 800-227-0729
      Fax: 862-354-5020

      E-Mail: info@testo.com
      http://www.testo.com